REG Linux device image
Capcom Home Arcade
Capcom Home Arcade pairs the Allwinner H3 SoC with the REG Linux stack for a polished retro console.
- Manufacturer: Koch Media
- SoC: Allwinner H3
- Maintained on the REG Linux download channel
Hardware specifications
Built for Koch Media
REG Linux targets this hardware profile so you can flash and play without manual tweaking.
Manufacturer
Koch Media
SoC
Allwinner H3
Image availability
Download the latest build from the REG Linux downloads hub (Koch Media section).
Install notes
Flash Capcom Home Arcade and boot
Follow the workflow below; the official board page contains any extra quirks for the Allwinner H3 platform.
- Grab the image. Download the latest Capcom Home Arcade build from the downloads page or the official board entry.
- Flash to storage. Use balenaEtcher, Raspberry Pi Imager, or `dd` to write the image to an SD card or SSD. Make sure to verify the checksum before booting.
- First boot setup. Insert the media into your Capcom Home Arcade, power on, and let REG Linux expand the filesystem. Pair controllers inside EmulationStation once prompted.
- Troubleshoot with rescue tools. REG Linux ships with an immutable base and rescue partition—if something breaks, reboot into rescue or reflash without touching your ROMs.
Need a refresher?
Cross-check kernel notes, device trees, or wiring tips on the Capcom Home Arcade board page.