REG Linux device image
Firefly Station M2 / ROC-RK3566-PC
Firefly Station M2 / ROC-RK3566-PC pairs the Rockchip RK3566 SoC with the REG Linux stack for a polished retro console.
- Manufacturer: Firefly
- SoC: Rockchip RK3566
- Maintained on the REG Linux download channel
Hardware specifications
Built for Firefly
REG Linux targets this hardware profile so you can flash and play without manual tweaking.
Manufacturer
Firefly
SoC
Rockchip RK3566
Image availability
Download the latest build from the REG Linux downloads hub (Firefly section).
Install notes
Flash Firefly Station M2 / ROC-RK3566-PC and boot
Follow the workflow below; the official board page contains any extra quirks for the Rockchip RK3566 platform.
- Grab the image. Download the latest Firefly Station M2 / ROC-RK3566-PC build from the downloads page or the official board entry.
- Flash to storage. Use balenaEtcher, Raspberry Pi Imager, or `dd` to write the image to an SD card or SSD. Make sure to verify the checksum before booting.
- First boot setup. Insert the media into your Firefly Station M2 / ROC-RK3566-PC, power on, and let REG Linux expand the filesystem. Pair controllers inside EmulationStation once prompted.
- Troubleshoot with rescue tools. REG Linux ships with an immutable base and rescue partition—if something breaks, reboot into rescue or reflash without touching your ROMs.
Need a refresher?
Cross-check kernel notes, device trees, or wiring tips on the Firefly Station M2 / ROC-RK3566-PC board page.