REG Linux device image
Firefly Station M3 / ROC-RK3588S-PC
Firefly Station M3 / ROC-RK3588S-PC pairs the Rockchip RK3588 SoC with the REG Linux stack for a polished retro console.
- Manufacturer: Firefly
- SoC: Rockchip RK3588
- Maintained on the REG Linux download channel
Hardware specifications
Built for Firefly
REG Linux targets this hardware profile so you can flash and play without manual tweaking.
Manufacturer
Firefly
SoC
Rockchip RK3588
Image availability
Download the latest build from the REG Linux downloads hub (Firefly section).
Install notes
Flash Firefly Station M3 / ROC-RK3588S-PC and boot
Follow the workflow below; the official board page contains any extra quirks for the Rockchip RK3588 platform.
- Grab the image. Download the latest Firefly Station M3 / ROC-RK3588S-PC build from the downloads page or the official board entry.
- Flash to storage. Use balenaEtcher, Raspberry Pi Imager, or `dd` to write the image to an SD card or SSD. Make sure to verify the checksum before booting.
- First boot setup. Insert the media into your Firefly Station M3 / ROC-RK3588S-PC, power on, and let REG Linux expand the filesystem. Pair controllers inside EmulationStation once prompted.
- Troubleshoot with rescue tools. REG Linux ships with an immutable base and rescue partition—if something breaks, reboot into rescue or reflash without touching your ROMs.
Need a refresher?
Cross-check kernel notes, device trees, or wiring tips on the Firefly Station M3 / ROC-RK3588S-PC board page.