Intel DE10-Nano

Intel DE10-Nano — device powered by Intel Cyclone V.

Hardware & Compatibility

Installation notes

1. Grab the image. Download the latest Unknown DE10_NANO build from the downloads page.

2. Flash to storage. Use balenaEtcher, Raspberry Pi Imager, or dd to write the image to an SD card or eMMC. Make sure to verify the checksum before booting.

3. First boot setup. Insert the media into your Unknown DE10_NANO, power on, and let REG Linux expand the filesystem. Pair controllers inside EmulationStation once prompted.

Resources

• REG Linux download page: https://reglinux.org/download/intel-de10nano/