X96 Max Plus¶
X96 Max Plus pairs the Amlogic S905X3 SoC with the REG Linux stack for a polished retro console.
Quick facts¶
-
Manufacturer: X96
-
SoC: Amlogic S905X3
-
Maintained on the REG Linux download channel
Hardware¶
| SoC | CPU | GPU |
|---|---|---|
| Amlogic S905X3 | ARM Cortex-A55 (4-core) | Mali (Panfrost) |
| RAM | Storage | Connectivity |
|---|---|---|
| Varies by board | Varies by board | Varies by board |
Software¶
| Kernel | GPU drivers | Compositor | Interface |
|---|---|---|---|
| Linux | — | Device-specific | REG-ES |
Installation notes¶
-
Grab the image. Download the latest X96 Max Plus build from the downloads page.
-
Flash to storage. Use balenaEtcher, Raspberry Pi Imager, or
ddto write the image to an SD card or eMMC. Make sure to verify the checksum before booting. -
First boot setup. Insert the media into your X96 Max Plus, power on, and let REG Linux expand the filesystem. Pair controllers inside EmulationStation once prompted.
Resources¶
- REG Linux download page: https://reglinux.org/download/x96-max-plus/